System_Error has quit [Remote host closed the connection]
a_fantom has joined #maemo-leste
System_Error has joined #maemo-leste
fantom has quit [Ping timeout: 244 seconds]
xmn has quit [Ping timeout: 248 seconds]
xmn has joined #maemo-leste
joerg has quit [Ping timeout: 244 seconds]
joerg has joined #maemo-leste
System_Error has quit [Remote host closed the connection]
System_Error has joined #maemo-leste
<freemangordon>
sicelo: no idea, I have no issue on virtualbox with the command:
<freemangordon>
xrandr --output Virtual1 --rotate normal
<freemangordon>
umm,
<freemangordon>
xrandr --output Virtual1 --rotate right
<gnarface>
i've seen issues on PC where certain drivers don't have full support for all the different rotation and movement coordinate shortcuts
<gnarface>
it seems to be X11 driver specific
<gnarface>
sometimes you have to fall back to doing it by pixels or degrees or whatever
<freemangordon>
or just use virtualbox :)
<gnarface>
seen this originally where nvidia's official drivers at the time didn't support "right of" and "left of" relative positioning shortcuts, but the nouveau equivalent did on the same hardware
<freemangordon>
it's free for personal use
<gnarface>
may be trackable by what particular randr version is claimed as supported, but not sure
<gnarface>
oh, in a VM, i thought he meant on a phone
<freemangordon>
gnarface: mhm
<freemangordon>
on n900 rotation is not supported
<freemangordon>
because kernel lacks omap3 VRFB support
<freemangordon>
and noone seems to be interested and capable enough to implement it :)
<sicelo>
i'm interested, so for me it's the latter. but thanks for the information
<freemangordon>
that's why I included the second condition :)
<freemangordon>
sicelo: BTW, implementing it should not be that hard, you may want to have a look in the TRM
<freemangordon>
search for VRFB
<freemangordon>
and see how it is implemented in omap1 kernel
Juest has quit [Ping timeout: 272 seconds]
<freemangordon>
and then similar to TILER support shall be implemented in upstream
Juest has joined #maemo-leste
hm has quit [Remote host closed the connection]
<sicelo>
ah, nice. i will check it out.
Twig has joined #maemo-leste
Anasko has quit [Ping timeout: 252 seconds]
n900 has quit [Ping timeout: 252 seconds]
n900 has joined #maemo-leste
joerg has quit [Ping timeout: 252 seconds]
joerg has joined #maemo-leste
System_Error has quit [Ping timeout: 264 seconds]
System_Error has joined #maemo-leste
<sicelo>
tbh while rotation would be nice, i guess i am more interested in 1. bluetooth (to unlock the FM receiver) and 2. the dsp (hoping it would be able to offload some work off our CPU, e.g. for calls)
<sicelo>
i'm happy to have worked on the fuel gauge, and it's now mostly in a state (in linux 6.15) where it is as sane as possible ootb :-)
pabs3 has quit [Read error: Connection reset by peer]
pabs3 has joined #maemo-leste
Madda has quit [Read error: Connection reset by peer]
Madda has joined #maemo-leste
akossh has joined #maemo-leste
<saeed>
hello people
<sicelo>
hi saeed
<sicelo>
Wizzup: probably need to start locking down the GH side ... there's a new issue created there
<Wizzup>
sicelo: ack
<sicelo>
finding a battery for the D4 is proving to be difficult. There's one I've just found, but to get it to fit, looks like I'll need to enlarge the battery bay a little
<Wizzup>
and you need to replace the charging pcb with the original battery one
<sicelo>
yes, that's what i did with the first replacement
<sicelo>
this one is slighly wider than the bay, so i'm thinking to trim off a bit of the plastic on the left of the bay (about 1mm), since on the right there's a piece of metal (where the pogo pins are)
<sicelo>
quite sure the advertised capacity isn't true, but as long as the phone boots. :p
_fab has joined #maemo-leste
_fab has quit [Ping timeout: 252 seconds]
joerg has quit [Ping timeout: 260 seconds]
joerg has joined #maemo-leste
<sicelo>
given up on the endeavor. even with trimming that 1mm, battery still doesn't fit. took a smaller one that advertises 1800mAh. didn't cost much, and if it lasts me a couple of months or a year, I guess it'll be acceptable
arno11 has joined #maemo-leste
saeed has quit [Read error: Connection reset by peer]
<sicelo>
arno11: Murphy's law ... last night I tested a dozen calls on N900, and in general all went well. today I got real calls and hit issues right away. sux
<arno11>
omg...
<arno11>
only the ringtone or ?
<sicelo>
the call itself
<sicelo>
Wizzup: your D4 still good/happy with new mce/upower/status-battery combo?
<arno11>
sicelo: what were the issues ? no sound, crashes ?
<sicelo>
there was no sound, but i did hear/feel the vibration. then i answered the call, then nothing
<arno11>
with silent profile ?
<sicelo>
general profile, i think
<sicelo>
and that's what i was testing with last night :p
<arno11>
now on my device, only the first call after boot is buggy with general profile (with mute tweak) btw
<sicelo>
left small review on your sphone PR. ignore the approval ... i'm not too used to the forgejo ux yet
<arno11>
ok np
<arno11>
sicelo: +100 @fmrx and dsp
<sicelo>
they're both difficult targets for my skill level though :-p
<arno11>
me too ofc...
System_Error has quit [Remote host closed the connection]
<arno11>
sicelo: btw the root cause of random ringtone issue seems gstreamer: even from sphone -c options, it takes 10 sec to launch a ringtone (cold). then it works fine until you let the device @idle for a while
System_Error has joined #maemo-leste
saeed has joined #maemo-leste
<saeed>
hi
<sicelo>
hi saeed
<sicelo>
arno11: yes, i've noticed some issues with gst as well
<arno11>
ok cool
<sicelo>
mmm, Wizzup, that issue with `check` is affecting a lot of packages. e.g. i was trying to install `gstreamer1.0-tools` and the same is happening
<arno11>
maybe try to remove all deb-src and re update ?
mkfx has left #maemo-leste [Disconnected: Replaced by new connection]
mkfx has joined #maemo-leste
<sicelo>
interestingly, now it works. i didn't modify the sources.list
<arno11>
cool
<sicelo>
arno11: so `gst-launch-1.0 -v playbin uri=file:///usr/share/sounds/Nokia_tune.aac` does take quite a bit of time to start on N900
<sicelo>
iirc this is something the dsp used to help with under Fremantle ... maybe one should try a WAV file
<arno11>
yeah takes 9-10 sec
<arno11>
already tried wav
<sicelo>
also slow/heavy?
<arno11>
yeah iirc
<arno11>
hmm aac 10 sec cold, 4 sec warm
<arno11>
wav 2 sec but all are very small files
arno11 has quit [Quit: leaving]
<sicelo>
arno11: wav ringtone works really good!!
<sicelo>
i simply converted Nokia_tune.aac to wav, which resulted in a 6MB file. rings perfectly everytime now.
<Wizzup>
maybe we take the free software song ogg, turn it into wav and make it our ringtone
<sicelo>
but, now call is completely silent :p
<Wizzup>
it'll probably make more of our users willing to figure out how to change the ring tone
<Wizzup>
sicelo: in these cases, please keep an eye on whether PA just crashes or not
<sicelo>
no idea what would have broken now ... maybe the rate?
arno11 has joined #maemo-leste
<arno11>
sicelo: cool @wav
<arno11>
for no sound, please try to mute ringtone before answering
<sicelo>
at least in the very last call, neither PA nor cmt_pulse crashed ... because i can see they both still have the same PIDs from last time
<sicelo>
arno11: doesn't help :-/
<arno11>
really weird, let me try
<sicelo>
but yeah the wav ringtone makes night and day difference ... even clicking buttons in sphone is finally responsive
<sicelo>
ah, now ringtone issues again :-D
<arno11>
it works fine on my device with wav
<arno11>
ringtone and call. you should reboot imo
<sicelo>
so when there was no audio, cmt_pulse was broken, and ringtone was perfect. then, now cmt_pulse is working, and ringtone starts behaving erratically
<sicelo>
hehe, didn't know the guy was an artist too :-D
<dsc_>
xD
<f_>
lol heard that one too much already
<f_>
:D
_fab has joined #maemo-leste
<sicelo>
arno11: i think something we should in cmtspeech is to register ourselves with PA the moment we start it. atm, it only registers itself as a client when the call starts, which is quite a racy time
<sicelo>
Wizzup: unfortunately i burned the d4 bms this time :-(
<sicelo>
phone itself seems fine, but the BL doesn't allow it to boot due to the absent signals i guess. it just shows Motorola logo for a short time, then powers off
xmn has quit [Quit: xmn]
xmn has joined #maemo-leste
_fab has quit [Ping timeout: 248 seconds]
System_Error has quit [Ping timeout: 264 seconds]
System_Error has joined #maemo-leste
xmn has quit [Ping timeout: 276 seconds]
arno11 has joined #maemo-leste
<arno11>
sicelo: @PA, worth a try
<arno11>
@ringtone, seems to work fine now (but with sphone mute modif)
<arno11>
*wav ringtone
Twig has quit [Remote host closed the connection]
<arno11>
it also seems to work fine with ogg files and indeed sphone is more responsive with 'lightweight' ringtones
<arno11>
*more responsive while ringing
<sicelo>
absolutely @ more responsive. nice to hear ogg is also lean
<arno11>
yep that's cool
<arno11>
i tried mauy
<arno11>
sorry
<arno11>
i tried maybe 20 calls, (cold, warm) no troubles atm