<op_4>
dilyn so i think the magic might be -DLLVM_CONFIG_EXE="$ROOTDIR/out/host/bin/llvm-config" and -DZIG_PREFER_LLVM_CONFIG=ON
2022-01-13
<omanom>
clearly your xorg config disgusted him lol
<dilyn>
can we see those configs
<noocsharp>
i used a static xorg config since normally arch relies on udev for autodetection
2022-01-09
<dilyn>
there's certainly a law of diminishing returns here ofc. the bigger the config, the more value
2022-01-07
<noocsharp>
bruh, why is the 64-bit kernel option at the top level of the kernel config instead of inside processor type
2022-01-05
<testuser[m]>
dilyn: just linking the pipewire config in /usr/share/alsa.conf.d/99-pipewire.default to /etc/asoundrc worked for me
2022-01-04
<Acid-Bong>
should i still do that, if I enabled the support in the kernel config?
<Acid-Bong>
If I enabled rtl8723be support in the kernel config, do i still need a separate binary driver for it?
<op_4>
oh lol, no dm_crypt in my kernel config
<op_4>
initramfs looks good, but errors out with "reload ioctl failed ... invalid argument". Does this ring any bells for ayone? bad kernel config?
<op_4>
would someone be willing to talk me through using tinyramfs? I can't seem to find any docs, and after extracting a config from the test files in the repo, it runs ("creating ramfs structure ..." etc) but doesn't seem to produce anything .. ?
2021-12-30
<Sarkic>
with default config
<omanom>
my goal is a reproducible install without me having to manually go through all the different steps (assuming same hardware and stuff so kernel config wouldn't change)
2021-12-27
<akira01>
can i do some meson or ninja config for parallel build?
2021-12-21
<Featyre>
Well I used localyesconfig while building and I have got rid of most of the CONFIG not found things and those final ones I don't know where do I even fix so I just left them
<illiliti>
forgot to mention that `lvm_config` usually isn't needed too
<illiliti>
Featyre: post your config
2021-12-19
<sad_plan>
its something to do with my kernel config. I figured Id tried to build while chrooting into my kiss build from an obarun live usb, and it worked.
<kjani>
finally made a config and am now doing make
<kjani>
phoebos: Okay ! let me see if the phinxy config works or not and if it does not then I will manually remove the modules using that technique
<kjani>
But how do I make sure that things are not a module in the debian config because that config depends on initramfs
<kjani>
I am asking this because I am using a debian kernel config and wanted to make sure it works
2021-12-18
<kjani>
midfavila: I have tried to use the make menuconfig option but a lot of the times the kernel does not boot, and because it takes me almost helf a day to install it in a chroot and after the boot nothing happens I lose all hope and go back to debian or arch, maybe this time I will use a debian config and try to atleast get used to the kiss lifestyle and in the next release eventually try make menuconfig and if that does not work
<kjani>
thankfully I will have a config that will so win-win :)
<testuser[m]>
u can use distribution configs and tweak
<kjani>
Hello ! Just popped in because I had made up my mind to start using source based distros, but the only issue I usually have is with the installation and the manual configuration of the kernel where I usually miss adding drivers for some components of my hardware?? is there an autoconf tool which can automatically build a kernel config for me or can I use a distribution kernel config ??
<NV6>
alsa-lib parser.c:2372:(load_toplevel_config) Unable to find the top-level configuration file '/usr/share/alsa/ucm2/ucm.conf'.
<NV6>
alsa-lib parser.c:2372:(load_toplevel_config) Unable to find the top-level configuration file '/usr/share/alsa/ucm2/ucm.conf'.
<testuser[m]>
o i had asked u to use your old config
<NV6>
I can send the edited .config, because I edited your configuration with the things under alsa changed to modulews
<testuser[m]>
ok save ur current config once and go back to the last one where everything was a module
<testuser[m]>
CONFIG_EXTRA_FIRMWARE*
<testuser[m]>
do ./scripts/kconfig/merge_config.sh -n .config
<testuser[m]>
can u try with my kernel config
<NV6>
kernel config?
<testuser[m]>
send your new config once
<testuser[m]>
NV6: In your kernel config, alsa is built as a module
<phinxy>
I must have gotten a default busybox config when I tried to enable FEATURE_EDITING_VI with make menuconfig.
2021-12-13
<tleydxdy[m]>
well, to clearify, I don't really want to put some config into the system, rather I want it to be something the user can run
<noocsharp>
would you mind posting your grub config?
<Jeff42>
Hello again, Grub is stuck at "loading linux-version" with my custom kernel and I have 0 idea to why (I have tested the kernel of my host distro and it works fine). My .config: https://pastebin.com/Fma7EBuD
<Jeff42>
I cant believe I forgot to turn the amdgpu driver to built in in the kernel config -_-
<Jeff42>
I have made compiled the kernel with firmware built-in this time and it still does not load automatically, image of CONFIG_EXTRA_FIRMWARE: https://imgur.com/mXFp9Fr
2021-12-09
<unah>
monospace: font does not appear to be monospace; check your config, or disable this warning by setting [tweak].font-monospace-warn=no
2021-11-30
<noocsharp>
is there a kernel config option that enforces pie?
<noocsharp>
turns out my static executable problem is related to kernel config, still haven't figured out what specifically
2021-11-25
<fishe23>
i cannot find an example of a config
<fishe>
config*
<fishe>
is it normal for there to be a lot of "___ did not have config ___"?
<fishe>
what was the make command to bring in config from parent kernel?
<bibliocar_>
oh, nice about the kernel. I've built it under the original os, but have yet to try doing so with llvm or anything on kiss. I figured I'd see what my userland needs before pruning features in the config.
2021-11-17
<dilyn>
some config options always flit around with foot releases...
<soliwilos>
Anyone on foot 1.10 experienced some issues with their foot config?
2021-11-16
<akira01>
maybe is something in my kernel config
<akira01>
used same .config
2021-11-12
<bibliocar>
I have an mnt reform. They have kernel config and device trees all in their repos for me. I just don't know how exactly to hook everything up. I figured I'd just go through the chroot kiss install and pray.
2021-11-01
<sn0w3d0wl>
jedavies: I tried building but kiss-meson-config not found
<sn0w3d0wl>
I guess I missed something in the kernel config
<sn0w3d0wl>
I'll throw you my efi related config here,
2021-10-27
<Guest82>
Greetings. Quick question, if I want to change keyboard layout I should use "xkeyboard-config" package right? Because its only provide "xkbcli" or I something missing?
2021-10-25
<testuser[m]1>
Search "ipv6" in about:config
2021-10-16
<noocsharp>
looks like this update will be completely painless, no config syntax changes that affect me
2021-10-14
<akira01>
anyone have a sane config of colors to bemenu?
2021-10-13
<akira01>
Had the same config
<dilyn>
akira01: my thoughts were sharing your /proc/cmdline and your dmesg output during boot. If gentoo is also giving you the same problem with the same kernel config, dmesg might be helpful, but it's probably just some weird kernel problem (just rc, right?)
2021-10-12
<akira01>
my .config file
<akira01>
i did the same .config
2021-10-11
<ioraff>
Has anyone encountered the need to restart/reload eiwd after boot? I've tried the following to no avail: sleep {5,10,30} before exec iwd, and a config with and without UseDefaultInterface=true
2021-10-08
<testuser[m]>
qemu doesnt seem to complain but im unable to see them inside the guest, probably a config issue
2021-10-05
<riteo>
I'm really starting to think that dylan could expose at least an USB hook in the default mdev config
2021-10-04
<Guest6492>
Greetings. Anyone can point it out how I should replace default busybox .config to my own? it is enough just to replace .config in files? then "kiss b && kiss i"?
2021-10-02
<rio6>
# CONFIG_CMDLINE_BOOL is not set
<sad_plan>
its called CONFIG_CMDLINE_BOOL
<rio6>
anyone know which kernel config I need to enable for mounting UUID=
2021-09-30
<dilyn>
the xdg-desktop-portal-wlr example config just declares... slurp...
2021-09-28
<aosync>
aspirus, mess around in menu config, find out how to specify the firmware dir and your firmware file
<aspirus>
aosync: i didnt change anything in the kernel config
<aosync>
ok, and did you add this folder to the firmware folder thing in the kernel config
<aspirus>
i didnt edit the default .config apart from what the install guide told
2021-09-26
<tleydxdy[m]>
guess my config is wrong somewhere
2021-09-18
<testuser[m]>
Does anyone know how the "controls" for v4l2 devices can be enabled in the kernel config ? like vertical_flip and horizontal_flip
2021-09-17
<testuser[m]>
idk how to config it
2021-09-16
<riteo>
for the courious, he set the config to disable locale support (understandable for this distro's goals) but he also made unicode work only when LANG ends with utf8
<riteo>
I wonder why dylan couldn't just have enabled the suid config file for busybox and bundled one there
2021-09-15
<testuser[m]>
yeah GalaxyNova i tried it yesterday didnt even work but thats probably a config issue
2021-09-10
<x4n>
P.S.i hope libwayland-dev, libgtk-3-dev pkg-config and meson are also present
2021-09-05
<Guest50>
I don't think I set up the EFI_STUB in the .config
2021-09-04
<Guest69nice>
I do need to change both suggested configs to Y but there is no selection
2021-08-29
<travankor>
CONFIG_NET*
<travankor>
one of the CONFIG_NET_SCHED options
<travankor>
CONFIG_NF_CT_NETLINK ?
2021-08-28
<travankor>
>Yuck. I have 64GB of RAM and even THAT isn't enough for some Minecraft mod configs.
2021-08-17
<claudia02>
Yeah, you can do this. Problems can arise because options can have sub options which are not yet in the .config
<Jason123santaOnI>
Should I edit the .config file because there is a warning to not touch it
2021-08-12
<m3g>
but that's on my kernel config
<m3g>
sway seems to have a silly default config
2021-08-11
<duplex>
it's loading the config
<duplex>
isn't the sway default config supposed to have a bar at the top
<duplex>
I downloaded the example config to ~/.config/sway/config and nothing changes
<duplex>
I cannot get sway to accept my config then
<dilyn>
i don't think any sway package in the repo comes with a sample config duplex
<duplex>
where is the example config for sway stored on KISS? sway docs say it's usually located at /etc/sway/config but that file doesn't exist
<duplex>
now it's asking for a config
<duplex>
do you want kernel config?
2021-08-10
<duplex56>
I can upload kernel config in a sec
<msk[m]>
just temporarily, to 0x0 the kernel config
<noocsharp>
would you mind posting your whole kernel config?
<acheam>
could you send or photograph or retype cat .config | grep FIRMWARE
<acheam>
kernel .config?
<noocsharp>
and you added all of them to your kernel config?
<soliwilos>
"config_extra_firmware_dir" and "config_extra_firmware".
<acheam>
have you listed them in the kernel config?
<testuser[m]>
acheam: have you listed them in the kernel config?
<acheam>
have you listed them in the kernel config?
<testuser[m]>
`# CONFIG_EFIVAR_FS is not set`
2021-08-09
<ang>
acheam: you could also write a wrapper shell script which checks the files extension and loads different configs depending on it
<testuser[m]>
Core crapware is disabled in both configs
2021-08-08
<GalaxyNova>
manjaro-user: It's most likely not a kernel config issue
<manjaro-user>
If I had to guess, I screwed up the kernel config. But could be something else.
<riteo-laptop>
I've read almost every single kernel compile option and did my own config
2021-08-07
<testuser[m]>
`pkg-config --libs fontconfig`
2021-08-06
<acheam>
that, or parsing an openbsd-format config file
2021-08-04
<riteo-laptop>
oh right if this is your config it's updated lol
<kyxor>
does this exist ? CONFIG_FEATURE_COMMAND_EDITING_VI=y
<msk[m]>
the only other vi-related option I saw in your config was CONFIG_VI but it was set to "n" so that can't be it
<acheam>
I do have CONFIG_FEATURE_EDITING=y
<acheam>
CONFIG_FEATURE_EDITING_VI
<acheam>
msk[m]: no special configs for that as far as I can see
<msk[m]>
acheam do you have CONFIG_FEATURE_EDITING_VI or something like that set? I don't see how our busyboxes could be different
<sad_plan>
dilyn: i know. my buildscript was buildable, but it wasnt really working for som reason. reverted back to wyverkiss' for now. been trying to read up on the specific configs, and I may be on to something this time. just didnt have enough time to build it again.
2021-07-24
<dilyn>
i was half tempted to just make a void chroot so i could nuke all my work when i was done and not mess with my git config
2021-07-23
<sad_plan>
perhaps, but I have webrtc disabled in about:config anyway, so its really no need for me to build firefox with webrtc to begin with :p
2021-07-21
<dilyn>
zfs complains if you have certain options enabled in the kernel config which i find hilarious
2021-07-19
<GalaxyNova>
removed my config file, same effect
<GalaxyNova>
i hightly doubt it's the config
<necromansy>
check the config file/defaults
<claudia_>
has one maybe found a config option, to select all? This is one thing I like very on 'st'
2021-07-18
<claudia>
Hm when, removing the Xf86key from the config makes wev to show the keypress, then I guess our way to parste the argument to "/usr/bin/foo --argument" is not right.
<akira01>
claudia: when disable amixer in sway config i can get XF86Audio from wev
<soliwilos>
Not using sway now, but in an old sway config I have "bindsym XF86AudioLowerVolume exec ...".
2021-07-17
<akira01>
have a way to change bemenu colors permanently or just put the colors in the command in sway config?
2021-07-16
<humaid_02>
Does ssl have anything to do with my kernel config?
<acheam>
doesnt look like theres a way to enable one with git config
2021-07-15
<GalaxyNova>
anyone have a good yambar config for sway?
<GalaxyNova>
anyone have a decent yambar config?
<akira01>
if amixer is not set in sway config
<akira01>
bemenu need config to exec commands?
<akira01>
u see my sway config?
<kqz>
well then your font config is having issues beyond foot probably ;p
<kqz>
yeah was just about to ask, it could be another config issue
<noocsharp>
i think compile time configs work better in languages with compiler time code execution
<illiliti>
i hate compile time configs
<schillingklaus>
ed can do most configs
<illiliti>
for configs
<msk[m]>
Ive never changed xorg's config
<soliwilos>
I also like not having to deal with xorg config's anymore.
2021-07-14
<acheam>
much nicer config language, works better
<kqz>
i know, i was just giving an example of the X86 hotkey config
<akira01>
Use the same command to sway config and put in XF86volume
<kqz>
though arguments should work fine in the sway config file
<kqz>
akira01: wym u can't set it in sway just add "exec wbg path/to/file.png" to your sway config
<kqz>
yes akira01, you use the config file to configure sway things ;p
<akira01>
just put in config file?
<dilyn>
afaik you can't alter gpg with git hooks, just git config (gpg.command)
<testuser[m]>
i have this in sway config
<akira01>
testuser[m]: can you see in about:config if it has media.ffmpeg.dmabuf-textures.enabled
<akira01>
can anyone confirm if this option has in firefox about:config media.ffmpeg.dmabuf-textures.enabled
<testuser[m]>
about:config webgl.disabled if true ? If yes try disabling it. Else set webgl.force_enabled to true
<testuser[m]>
And the config
<GalaxyNova>
> the about:config changes
<GalaxyNova>
default_border pixel 1 in sway config
<testuser[m]>
check webgl flags in about:config
<akira01>
can confirm if you about:config had this option "media.ffmpeg.dmabuf-textures.enabled" ?
<dilyn>
you can usually just use the compositor's config itself
2021-07-13
<ang>
msk: I don't mind a config
<claudia>
Its config is qwerty keyboard specific. And switching tags does just not work on a qwertz keyboard.
<msk>
I just finished making the dwl config
<msk>
I thought it would have one-built in because the config had tag names
<dilyn>
I stopped using ccache shortly before ccache.conf moved to .config, sue me :P
<akira01>
oh so i can put a .config file to change it?
<akira01>
testuser[m]: i need to config the keyboard in sway to make it work?
<akira01>
sway need to config keyboard?
<dilyn>
either libxkbcommon or wlroots or sway should depend on xkeyboard-config << @dylan (:
<dilyn>
install xkeyboard-config
<GalaxyNova>
in my old dwm config i had like 10 layouts
2021-07-12
<noocsharp>
i just tried to enable it and kept getting errors in my config
<acheam>
git config merge.verifySignatures false
<claudia>
Just rebuilding ykeyboard-config or libxkbcommon and the issue was gone.
<claudia>
kyxor: Look at kiss-manifest xkeyboard-config. I think I encountered this problem too, altough I did a kiss-reset.
2021-07-10
<dilyn>
it's a few CONFIG_*=y's away from the minimum required for sound in terms of actual sound support
<GalaxyNova>
do i need some special kernel config for alsa to work?
2021-07-09
<micro_O>
It also might not be sway's fault - could be some kernel config / missing IPC or service, etc.
<midfavila-laptop>
at least on my system. that's not with any packages or fancy configs.
<acheam>
oh, so even if i'm booted with BIOS, but as long as the kernel has the config?
<dilyn>
acheam: if you're looking to just use efibootmgr to directly utilize efistub, just make sure efistub is enabled in your kernel config
2021-07-08
<kqz[m]>
on foot? yeah there's a config option
<acheam>
dilyn: can we change CONFIG_UNAME_OSNAME in the busybox config?
2021-07-07
<dilyn>
my favorite kernel config is a config that works
<nerditup>
everyone should share their favourite kernel config
<sad_plan>
10.3mb for the kernel isnt too shabby if you ask me. thats 2mb down from my previous kernel config
<sad_plan>
Tah, theres probably more bs from me disabling config_block.. scsi was appearently also unchecked..
<sad_plan>
aah, I think Ive found the issue. config_block, which I unchecked, seems to have a reverse depency of vfat_fs.
<sad_plan>
wouldnt happen to know if any of configs in the bottom here http://0x0.st/-fnE.txt, that triggers the kernel of not finding the init? im trying to trim down on the kernel size :p
<midfavila>
acheam that's not quite the same as proper persistence. i was thinking more along the lines of adding it to the init config. ultimately it's not a big deal
<acheam>
if you add it to the sysctl config it is
2021-07-06
<midfavila-laptop>
i would just use du to walk the filesystem, tr to put it all on one line, and then copy-paste the resulting list of blobs into the .config by hand
2021-07-04
<acheam>
ooh busybox config allows you to disable cat -v
<acheam>
oh and it should be written in a sane language with a sane config language
<acheam>
after that: my config files
2021-07-03
<kayw>
is it a good idea to use `make localyesconfig` when making the kernel config?
<thermatix>
I'm not good at config so I can't get the GUI side of things looking as I want either
<jslick>
Here's my config for w520 kernel 5.10.24 running kiss: http://ix.io/3rMV ; should be similar to x220 ; iirc I configured firmware for iwlwifi-6000g2a-6.ucode according to the kiss wiki
<kayw>
oh cool, i havent gotten to the kernel config yet
<jslick>
I have kernel config for w520, using intel graphics, should be similar to x220
<kayw>
i can manage basically everything minus the config :/
<kayw>
does anyone happen to have a kernel config for an x220? i have no clue where to start, and having a reference would be nice.
2021-07-01
<midfavila>
so when it attempts said query to generate a config file, it fails
<sad_plan>
error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel
2021-06-30
<midfavila>
gaaaaaaaaaaaaaah, I'm really gonna have to rework my config for a stable kernel, aren't I...
<testuser[m]1>
You can disable everything in the config,
2021-06-29
<Guest88>
For me I only needed to add four lines to my ALSA config.
<midfavila>
i've seen some pretty crazy awesomewm configs
<rio6>
spent too much time on the config
<midfavila>
try alsactl init. that *should* force it to reload your config file... as far as I'm aware.
<midfavila>
uh, yeah, if you're making changes in config files, I'd close everything using your sound card and then alsactl restart or w/e
<Guest78>
When I added device <NUM> to my alsa config I got another bar in alsamixer that is labelled PCM
<midfavila>
or manual specification in your X config
2021-06-28
<dilyn>
see the things llvm-config's various options outputs
<illiliti>
try to change root option to /dev/dm-0 in tinyramfs config
<illiliti>
before regenerating initramfs, add 'monolith=1' to tinyramfs config
<illiliti>
grep '=m' .config
<Guest12>
There are a bunch commented out, e.g. # CONFIG_CRC8 is not set"
<illiliti>
by CONFIG*, i mean all CONFIG
<Guest12>
Don't see CONFIG* anywhere
<Guest12>
Can I find this in menuconfig or .config manually?
<Guest12>
This turns on all with CONFIG_
<illiliti>
i mean kernel shouldn't have CONFIG*=m
<illiliti>
did you compile kernel with CONFIG*=y ?
<illiliti>
yes, config is correct
<illiliti>
send your tinyramfs config and blkid output from that shell
<Guest68>
After generating the grub config file again
<Guest68>
How would I put amdgpu bin files into the .config for file? For iwlwifi it's CONFIG_EXTRA_FIRMWARE="****.ucode", do I need to type this in for every bin file?
2021-06-25
<dilyn>
I'd have to fiddle with it a bit more. can you send along the kernel config you're using?
<michael>
I think I enabled something related to KVM in the kernel config, though
2021-06-23
<ang>
I have most of my stuff in .config
2021-06-21
<kimerus>
I just cp the saved config to the new kernel
<omanom>
did you load a saved kernel config when you compiled it when reinstalling?
2021-06-19
<dilyn>
sorry that's backwards; CONFIG_EXTRA_FIRMWARE_DIR should point to /usr/lib/firmware, CONFIG_EXTRA_FIRMWARE points to the firmware blobs
<dilyn>
enable CONFIG_EXTRA_FIRMWARE to point to /usr/lib/firmware and set the FIRMWARE_DIR to foo/bar.bin, where foo is whatever folder has your nvidia firmware, and bar.bin is the firmware blob
<claudia>
in your .config
<Andrei_>
wheres's config_extra_firmware?
<claudia>
Y, you move the firmware stuff to usr/lib/firmware, set novuou stuff to =y instead of =m and you have to specify the firmware in "config_extra_firmware"
<testuser[m]1>
Go for a static X config then, no udev
<kimerus>
Is the same configs
2021-06-17
<acheam>
surprisingly kernel config worked first try
2021-06-16
<ang>
I just checked our .config, it is indeed enabled
<necromansy>
i like environ config
2021-06-15
<GalaxyNova>
or change the config values if you use ST?
<midfavila-laptop>
just added a modeline to my tiling wm config, am I cool yet
2021-06-14
<GalaxyNova>
noocharp: I agree that for config file editing Neovim is overkill, but if you want to use it like an IDE then it's features are really useful
<noocsharp>
post your grub config
<snakedye>
weechat is probably one of the worst offender. the default config is disgusting