lanefu changed the topic of #armbian-rockchip to: Armbian - Linux for ARM development boards | Rockchip SoC | www.armbian.com | This channel is relayed to the equivalent Discord channel | this channel is logged
<DC-IRC> [Discord] <3rd3y3m3nti0n47> Are the community builds for pinebook pro all Ubuntu and not Debian? I'd like to install armbian on my SD card
<DC-IRC> [Discord] <microlinux> You can build it yourself, the armbian builder is quite friendly and if you set an stable kernel branch, there is no need to build the kernel
<DC-IRC> [Discord] <3rd3y3m3nti0n47> This would be my first attempt at doing so. Any resources would be greatly appreciated. I saw there's weekly community builds on the github. I'm assuming those are more bleeding edge.
<DC-IRC> [Discord] <microlinux> Sure
<DC-IRC> [Discord] <microlinux> https://github.com/armbian/build
<DC-IRC> [Discord] <microlinux> The github repo mentions jammy, but I do build on arm64 ubuntu noble and it does work fine
<DC-IRC> [Discord] <3rd3y3m3nti0n47> Thank you, i aprreciate your response πŸ™‚
<DC-IRC> [Discord] <3rd3y3m3nti0n47> Thank you, i appreciate your response πŸ™‚
<DC-IRC> [Discord] <microlinux> Just ./compile and then it's every quite straightforward
<DC-IRC> [Discord] <microlinux> Just ./compile.sh and then it's every quite straightforward
<DC-IRC> [Discord] <microlinux> Just ./compile.sh and then it's quite straightforward
<DC-IRC> [Discord] <microlinux> I do build from rk3588 from nvme ssd
<DC-IRC> [Discord] <microlinux> But you can use x86_64 ubuntu
<DC-IRC> [Discord] <3rd3y3m3nti0n47> Sounds good. I'll be building later tonight. Might either attempt on my rk3399 pinebook or from my gmktec mini pc later (would have to use WSL under windows i'm assuming)
PhotoJim has quit [Read error: Connection reset by peer]
PhotoJim has joined #armbian-rockchip
<DC-IRC> [Discord] <jakesays> @efectn i'll test those images now. thanks!
DC-IRC has quit [Remote host closed the connection]
DC-IRC has joined #armbian-rockchip
<DC-IRC> [Discord] <jakesays> just so i understand correctly, if everything is set up properly i should be able to configure wifi via armbian-config, right?
<DC-IRC> [Discord] <mecoblock> if you don’t just minimal there is also nmtui
<DC-IRC> [Discord] <mecoblock> if you don’t use minimal there is also nmtui
<DC-IRC> [Discord] <jakesays> i'm not using minimal for this test, but i don't have a monitor or kbd/mouse
<DC-IRC> [Discord] <mecoblock> but armbian-config wifi settings worked the last time (fairly recent) I checked
<DC-IRC> [Discord] <mecoblock> so you should be good
<DC-IRC> [Discord] <jakesays> the option to configure wifi isn't available armbian-config
<DC-IRC> [Discord] <jakesays> which means that something is wrong with the image
<DC-IRC> [Discord] <jakesays> everything i read online about it tells me to activate a non-existent overlay
<DC-IRC> [Discord] <mecoblock> which board
<DC-IRC> [Discord] <jakesays> @mecoblock orange pi 5b
<DC-IRC> [Discord] <jakesays> ah. it is showing up on a different image
<DC-IRC> [Discord] <jakesays> but the ui is broken and i can't see the access point
<DC-IRC> [Discord] <jakesays> it is frustrating that the MAC address isn't fixed on these boards.
<DC-IRC> [Discord] <3rd3y3m3nti0n47> Update to my earlier message. I've decided to build the image on my pi 4 using armbian. About to start the process now 🀞
<DC-IRC> [Discord] <efectn> That's weird
<DC-IRC> [Discord] <jakesays> @efectn yeah it doesn't scroll the list
<DC-IRC> [Discord] <jakesays> and unfortunately there are about 35 access points around me
<DC-IRC> [Discord] <jakesays> @efectn but emmc works great on both images
<DC-IRC> [Discord] <efectn> At least it works πŸ˜„
<DC-IRC> [Discord] <jakesays> the wifi device isn't available on the 6.14 kernel though
<DC-IRC> [Discord] <efectn> Yeah probably i need to add some patches will check
<DC-IRC> [Discord] <efectn> Is GUI broken on 6.1, too?
<DC-IRC> [Discord] <jakesays> i don't know. i'm running headless
<DC-IRC> [Discord] <jakesays> @efectn wait do you mean the access point UI in armbian-config?
<DC-IRC> [Discord] <efectn> No i mean DE UI
<DC-IRC> [Discord] <jakesays> yeah i didn't try that
<DC-IRC> [Discord] <jakesays> i need to locate some more hardwre
<DC-IRC> [Discord] <jakesays> @efectn is bt configurable via armbian-config?
<DC-IRC> [Discord] <efectn> Can you send me dmesg of 6.14
<DC-IRC> [Discord] <jakesays> yeah. i need to re-flash it. just a sec
<DC-IRC> [Discord] <jakesays> @efectn does it matter if it boots from emmc or sd-card?
<DC-IRC> [Discord] <efectn> No
<DC-IRC> [Discord] <jakesays> @efectn https://paste.armbian.com/yolekufuji.yaml
Herc has quit [Read error: Connection reset by peer]
Herc has joined #armbian-rockchip
Herc has quit [Remote host closed the connection]
Herc has joined #armbian-rockchip
Herc has quit [Remote host closed the connection]
Herc has joined #armbian-rockchip
<DC-IRC> [Discord] <menu> it's so frustrating i use a udev rule to set it to a fixed value
<DC-IRC> [Discord] <jakesays> @menu what's your rule?
<DC-IRC> [Discord] <menu> i'm not at a machine to grab it now, iirc wildcard matching the first eth and setting a mac
<DC-IRC> [Discord] <Werner> We should move 5b to EOL. While 5 mostly just works the 5b only causes trouble and eats time.
<DC-IRC> [Discord] <jakesays> i thought it was a community project
<DC-IRC> [Discord] <mecoblock> for clarity orangepi 5b right? πŸ˜‚
<DC-IRC> [Discord] <lanefu> Hahaha I got nervous reading that
<DC-IRC> [Discord] <Werner> Yes lol. I know there is a another 5b device but that lacks frustration, so should be good πŸ˜„
<DC-IRC> [Discord] <efectn> Probably needs some adjustments on ap6275p node. I also remember there were some reports in forum as far as i remember
<DC-IRC> [Discord] <efectn> I think we better mark csc firstly
<DC-IRC> [Discord] <Werner> isn't it csc already?
Herc has quit [Quit: Leaving]
Herc has joined #armbian-rockchip
Herc has quit [Client Quit]
Herc has joined #armbian-rockchip
<DC-IRC> [Discord] <efectn> There is no board config for 5v
<DC-IRC> [Discord] <efectn> There is no board config for 5b
<DC-IRC> [Discord] <Werner> Yeah right
<DC-IRC> [Discord] <microlinux> It's recommended to use nvme over usb then. It will take years on sd, also harming your sd lifespan
<DC-IRC> [Discord] <microlinux> It's recommended to use nvme or any ssd over usb then. It will take years on sd, also harming your sd lifespan
<DC-IRC> [Discord] <microlinux> It's recommended to use nvme or any ssd over usb then. It will take years on sd, also reducing your sd lifespan
<DC-IRC> [Discord] <microlinux> A good rk3588 (not S) with nvme is the most affordable yet decent armbian builder.
<DC-IRC> [Discord] <k1takasetheri0n> Latest Linux-image-vendor-rk35xx failing on upgrade of package
<DC-IRC> [Discord] <k1takasetheri0n> Latest Linux-image-vendor-rk35xx failing on upgrade of .deb package