lanefu changed the topic of #armbian-rockchip to: Armbian - Linux for ARM development boards | Rockchip SoC | www.armbian.com | This channel is relayed to the equivalent Discord channel | this channel is logged
<DC-IRC>
[Discord] <misty_cloud_> Ah see. I'm assuming kerbal 6.1 requires i build my own image?
<DC-IRC>
[Discord] <misty_cloud_> Hence why i'm here Hahaha
<DC-IRC>
[Discord] <human_urostor> No.
<DC-IRC>
[Discord] <misty_cloud_> Ah see. I'm assuming kernal 6.1 requires i build my own image?
<DC-IRC>
[Discord] <misty_cloud_> Ah see. I'm assuming kernel 6.1 requires i build my own image?
<DC-IRC>
[Discord] <misty_cloud_> wait, I need an older kernel to oc the ram?
<DC-IRC>
[Discord] <misty_cloud_> `hostnamectl` tells me `Kernel: Linux 6.12.33-current-rockchip64`
<DC-IRC>
[Discord] <human_urostor> Can you just Google about the difference between the vendor and mainline kernels
<DC-IRC>
[Discord] <human_urostor> It's not just "older", it's a fork
<DC-IRC>
[Discord] <misty_cloud_> ah
<DC-IRC>
[Discord] <misty_cloud_> I see, explains why vendor pops up a lot not. Hmmm
<DC-IRC>
[Discord] <misty_cloud_> might I suggest adding a line in the "optimizing rk3588" wiki page to include that it needs vendor?
<DC-IRC>
[Discord] <random_anon_cesar> Just curious but what is the current swappiness of your install?
<DC-IRC>
[Discord] <random_anon_cesar> If your board has a lot of ram, you should be fine to lower it to something like 3. Favor using as much ram as possible before switching over to the swap file
DC-IRC has quit [Remote host closed the connection]
DC-IRC has joined #armbian-rockchip
<DC-IRC>
[Discord] <misty_cloud_> I would but power is currently cut at my house
<DC-IRC>
[Discord] <misty_cloud_> also switching to vendor has stopped it from booting so im gonna have to figure out how to fix that
<DC-IRC>
[Discord] <misty_cloud_> 💀
<DC-IRC>
[Discord] <misty_cloud_> im guessing i need to reflash the spi flash
<DC-IRC>
[Discord] <human_urostor> Maybe not enough
<DC-IRC>
[Discord] <misty_cloud_> hopefully
<DC-IRC>
[Discord] <misty_cloud_> if not then i will just reflash
<DC-IRC>
[Discord] <misty_cloud_> i can recover my server data lol
<DC-IRC>
[Discord] <Werner> Sometimes vendor needs matching uboot on spi or whatever it boots from. Same for mainline
<DC-IRC>
[Discord] <misty_cloud_> yup so im about to do that
<DC-IRC>
[Discord] <misty_cloud_> Figures, so im about to do that
<DC-IRC>
[Discord] <mecoblock> the oc / overlays also are made for vendor kernel so not sure how you got it that far to begin with
<DC-IRC>
[Discord] <mecoblock> it had said that in the beginning
<DC-IRC>
[Discord] <misty_cloud_> 💀
<DC-IRC>
[Discord] <misty_cloud_> Well now i need to figure out how to get vendor to boot on the ultra
<DC-IRC>
[Discord] <misty_cloud_> either that or how to reverse switching to vendor lol. Learning by bricking. how fun
<DC-IRC>
[Discord] <mecoblock> well is there no vendor image option for that board?
<DC-IRC>
[Discord] <misty_cloud_> Not that i know of, closest one is the Orange Pi 5 Max
<DC-IRC>
[Discord] <mecoblock> yeah don’t use closest
<DC-IRC>
[Discord] <misty_cloud_> Rather, i used armbian-config to switch kernels
<DC-IRC>
[Discord] <misty_cloud_> Where can i find the vendor images
<DC-IRC>
[Discord] <mecoblock> @werner any plans on adding the vendor dt, kernel target for opi5 ultra?
<DC-IRC>
[Discord] <misty_cloud_> is there a github with premade images like for armbian github?
<DC-IRC>
[Discord] <mecoblock> If support is there then images will also be there. Rn support is missing and it is community maintained (as is, "no" support)
<DC-IRC>
[Discord] <misty_cloud_> aah
<DC-IRC>
[Discord] <misty_cloud_> well shucks
<DC-IRC>
[Discord] <misty_cloud_> Any way to change kernel while not booted LOL if not, guess im reflashing the nvme again
<DC-IRC>
[Discord] <misty_cloud_> Well it's at 100, gonna change that now
<DC-IRC>
[Discord] <misty_cloud_> Well it's at 100, how do I change it?