lanefu changed the topic of #armbian-rockchip to: Armbian - Linux for ARM development boards | Rockchip SoC | www.armbian.com | This channel is relayed to the equivalent Discord channel | this channel is logged
DC-IRC has quit [Remote host closed the connection]
DC-IRC has joined #armbian-rockchip
lanefu has joined #armbian-rockchip
<DC-IRC>
[Discord] <misty_cloud_> So i tried to look up my ram's part number, and discovered that Micron decided to delete the datasheet of the ram the orange pi 5 ultra is using :/
<DC-IRC>
[Discord] <misty_cloud_> The ram with a very similar part number (very last letter is different) says it has a speed of 4266 MHz and yet a 3200MHz ram OC causes the opi 5u to fail to boot. Any idea what I am doing wrong
<DC-IRC>
[Discord] <human_urostor> As said before, you can use `kernel-patch`, not sure if there's any other way
<DC-IRC>
[Discord] <misty_cloud_> is this specifically for the 5b+? I'm running the 5B ultra
<DC-IRC>
[Discord] <human_urostor> Armbian
<DC-IRC>
[Discord] <misty_cloud_> Wait, so this is for a new build of Armbian?
<DC-IRC>
[Discord] <misty_cloud_> Sorry, is this message related to my question on OCing ram? Im confused hahaha
<DC-IRC>
[Discord] <menu> if you've got the part number, and ideally a (dead) link to the datasheet, i may be able to procure it
<DC-IRC>
[Discord] <human_urostor> I was replying to something else...
<DC-IRC>
[Discord] <human_urostor> I was replying to someone else...
<DC-IRC>
[Discord] <misty_cloud_> Oops my bad Hahahaha
<DC-IRC>
[Discord] <menu> i'll have a dig when the sun's gone down, can't use my macbook in the day rn 🫠
<DC-IRC>
[Discord] <misty_cloud_> all good, the sun would be rising soon for me and i haven't slept :laughs:
<DC-IRC>
[Discord] <misty_cloud_> Good night
<DC-IRC>
[Discord] <mecoblock> it is supposed to be 4266mhz so the 3200 mhz oc should be possible. Could be that the traces on the OPI cannot handle the clocks though
<DC-IRC>
[Discord] <misty_cloud_> Yeah thought something smelt fishy. btw how do you come up with the values for the 4 frequencies? any way to overclock but only slightly
<DC-IRC>
[Discord] <mecoblock> using the same device tree overlay and rkddr set to the mhz you want. Start with 3000 and see if it works
<DC-IRC>
[Discord] <mecoblock> then again I would not recommend you doing it :D
<DC-IRC>
[Discord] <misty_cloud_> what about freq1, 2, 3
<DC-IRC>
[Discord] <misty_cloud_> Just following the guide lol. Finally figured out how to unbrick without needing to reflash nvme (Didn't understand that what needed reflashing was the spi-flash)
<DC-IRC>
[Discord] <mecoblock> leave them like in the sbcwiki tutorial and freq as your max
<DC-IRC>
[Discord] <misty_cloud_> aite, i'll try it when i am home from my outing tmr. Which board did you use to oc the ram?
<DC-IRC>
[Discord] <mecoblock> Radxa Rock 5B Plus
<DC-IRC>
[Discord] <misty_cloud_> Also, last time i tried the 'cat /sys/class/devfreq/dmc/available_frequencies', i could not find it after setting freqs
<DC-IRC>
[Discord] <misty_cloud_> Aah. My choice of SBC was that it had to have pcie 3x4 and as close to the RPI's size as possible
<DC-IRC>
[Discord] <misty_cloud_> maybe i should have gotten the max instead of the ultra as it seems the ultra has far less known about it lol
<DC-IRC>
[Discord] <mecoblock> are you using mainline kernel or vendor 6.1
<DC-IRC>
[Discord] <misty_cloud_> uhhhh i got it from weekly on the github page
<DC-IRC>
[Discord] <mecoblock> run uname -a and post the output
<DC-IRC>
[Discord] <misty_cloud_> `Linux orangepi5-ultra 6.12.33-current-rockchip64 #1 SMP PREEMPT Tue Jun 10 11:13:00 UTC 2025 aarch64 GNU/Linux`
<DC-IRC>
[Discord] <misty_cloud_> this is it
<DC-IRC>
[Discord] <misty_cloud_> side question: How do I enable the wifi antenna?
<DC-IRC>
[Discord] <mecoblock> that’s wrong
<DC-IRC>
[Discord] <human_urostor> Yeah you need kernel 6.1. I don't want to patronize but really, ARM embedded boards are cursed enough even without overclocking, better to get to know how they work a bit more first.
<DC-IRC>
[Discord] <human_urostor> Yeah you need kernel 6.1. You need to know the difference. I don't want to patronize but really, ARM embedded boards are cursed enough even without overclocking, better to get to know how they work a bit more first.
<DC-IRC>
[Discord] <bugzbanger> hmmm okay I am starting to think the issues isn't with the 64k, but the latest main branch that has an issue with networking
<DC-IRC>
[Discord] <bugzbanger> Oh no, PEBCAK, set the board to orangepi5 and not orangepi5-ultra